How to Mix Vocals Like Tate McRae (Modern Pop-Dance Guide)

Hoe je vocalen mixt zoals Tate McRae (Moderne Pop-Dance Gids)

door Byron Hill II in Nieuws

Tate McRae’s vocale geluid is intiem in de coupletten en glanzend in de refreinen—ademend maar helder, helder zonder hardheid, en altijd stabiel in niveau. Deze gids leidt je door opname, routing, ketenvolgorde, FX-ontwerp, stacks en exportdoelen zodat je mix overleeft op telefoons, oordopjes en grote ruimtes. Als je een voorsprong wilt, voeg dan pop vocal presets toe als basiskaart en pas drempels en sends aan voor je stem.

I. Wat luisteraars verwachten van deze esthetiek

Moderne pop-dance vocalen voelen dichtbij en emotioneel aan. Je hoort zachte medeklinkers en ademtextuur in het couplet, gevolgd door een opgeheven, luchtige hook die boven synths en drums zweeft. Het hoge einde is mooi in plaats van scherp, de lage middentonen blijven slank, en de dynamiek is stabiel door seriële compressie—geen keiharde limiter.

  • Presentie: leesbare 2–4 kHz zonder scherpe pieken.
  • Lucht: zachte glans bij 10–12 kHz; de-ess voordat je glans toevoegt.
  • Diepte: korte plaat/kamer plus tempovertragingen die meebewegen met de groove.
  • Lift: dubbels, fluisteringen en strakke harmonieën die in het refrein omhoog komen.

II. Opnamekeuzes die later lonen

Neem 15–20 cm van een popfilter op. Richt ruwe pieken rond −12 tot −8 dBFS. Houd de booth stil; vermijd zware EQ of compressie bij de ingang. Als je een kleine HPF nodig hebt voor ruis, stel deze dan conservatief in.

Comp schone takes. Behoud natuurlijke ademhalingen—deze stijl vertrouwt op luchttextuur. Als je hulp nodig hebt bij het bouwen van een betrouwbare opnameruimte, behandelt deze home vocal studio guide de basis van de ruimte, gain staging en workflow zodat takes mix-klaar aankomen.

III. Routing die je snel en georganiseerd houdt

Maak vier sporen aan:

  • LEAD – hoofdvocalen.
  • BGV – harmonieën en pad-achtige stapels.
  • WHISPER – ademende dubbels spaarzaam gebruikt voor glans.
  • ADLIB – karaktermomenten en overgangen.

Alles voedt een Vocal Master bus waar je monitort via een zachte keten. Sends: mono slap, tempo delay, korte plaat of strakke ruimte, en een “throws” bus voor moment-effecten.

IV. De baslijnketen (cijfers waarop je kunt vertrouwen)

Houd bewegingen klein. Het geluid is verfijnd, niet opgeblazen.

  1. Pitchcorrectie: stel toonsoort/schaal in. Hooks kunnen een snellere retune aan; verzen geven meestal de voorkeur aan een gematigde snelheid. Gebruik “humanize/transition” zodat lange klinkers natuurlijk blijven. Schakel formanten in wanneer beschikbaar.
  2. Subtractieve EQ: HPF 70–90 Hz (afhankelijk van de stem). Als het boxy klinkt, dip zachtjes 200–350 Hz (brede Q). Als het nasaal klinkt, probeer een zachte notch rond 1 kHz.
  3. Compressor 1 (vorm): 2:1–3:1, attack 10–30 ms, release 80–200 ms of auto, 3–5 dB GR op frases. Laat medeklinkers ademen.
  4. De-esser 1: breedbandig bij 6–8 kHz; verminder alleen wat je hoort op oordopjes.
  5. Harmonische kleur: warm/tape/triode bij 5–10% mix. Pas de output aan zodat “louder” je niet misleidt.
  6. Compressor 2 (veiligheid): sneller, 1–2 dB GR op pieken om het niveau stabiel te houden in refreinen.
  7. Polish EQ: als de microfoon zacht is, +0,5–1 dB bij 3–4 kHz voor aanwezigheid en +0,5–1 dB shelf bij 10–12 kHz voor lucht. Als sibilantie toeneemt, ga dan terug naar de-essing in plaats van meer te versterken.
  8. Sends: mono slap 80–120 ms of een gesynchroniseerde 1/8; kleine plate/room (0,7–1,2 s) met 20–60 ms pre-delay; speciale “throws” voor sleutelwoorden.

V. Tijd- & ruimteontwerp voor moderne hooks

  • Slap delay: mono, 80–120 ms, lage feedback, gefilterd tot ~150 Hz–6 kHz. Voegt beweging toe zonder nevel.
  • Tempo delay: 1/8 of dotted-eighth, lage feedback. Duck het met sidechain zodat herhalingen ademen tussen lettergrepen.
  • Plate vs. room: korte heldere plate (0,7–1,0 s) voor lift of een strakke studioruimte voor intimiteit. Altijd high-pass en low-pass op de return.
  • Throws: automatiseer een bredere delay alleen bij overgangen; vorm met filters zodat de tekst de focus blijft.

Controleer opnieuw bij laag volume. Als de articulatie vervaagt, verkort de pre-delay, verminder HF in de returns, of ride FX omlaag tijdens snelle frases.

VI. Refreinarchitectuur: doubles, whispers, harmonieën

Doubles: neem twee strakke doubles op voor de hook. High-pass iets hoger dan de lead, pas meer de-ess toe en zet elke 6–9 dB lager. Houd het midden voor dikte of pan licht L/R voor breedte zonder chorus swirl.

Whisper layer: een zachte ademende take kan pop-shimmer toevoegen. Filter de lage tonen, de-ess stevig en comprimeer licht; het moet gevoeld worden, niet opvallend zijn.

Harmonieën: houd ze als een schoon bed. Minder saturatie, donkerdere reverb. Als de stapel troebel wordt, dip 250 Hz met 1–2 dB op de BGV-bus. Automatiseer ingangen zodat de hook opent in plaats van in volume te springen.

Gain choreografie: ride de lead ±1 dB op de downbeats. Til de doubles iets op in de laatste maat voor het refrein om momentum te creëren.

VII. Plaats de vocal in de productie

Of je nu mixt over een stereo-instrumentaal of gegroepeerde stems, richt je op overlapbeheer in plaats van het verhogen van helderheid.

  • Dynamic EQ on the music bus: sidechain a small 2–4 kHz dip from the lead; consonants pop without harshness.
  • Low-end coexistence: if kick or bass masks syllables, try a dynamic shelf around 120–180 Hz keyed from the lead on the music bus.
  • Phone & small-speaker proof: bounce a quick rough and listen on a phone speaker. If hats sting, reduce the lead air shelf 0.5 dB and low-pass the delay return.

VIII. Twee complete ketens (alleen stock en van derden)

Alleen stock-keten (elke grote DAW):

  1. Toonhoogtecorrectie: snel voor hook-liften, matig voor verzen; humanize/transition ingeschakeld; formanten behouden.
  2. EQ: HPF 80 Hz; breed −2 dB bij 250 Hz als het modderig klinkt; klein +0,5 dB bij 3,5 kHz als het dof is.
  3. Compressor 1: 2:1; attack 20 ms; release 120 ms; 3–5 dB GR.
  4. De-esser: 6–8 kHz, breed; verlaag 2–4 dB op S-klanken.
  5. Saturatie: warm/band, 5–10% mix.
  6. Compressor 2: sneller; 1–2 dB GR op pieken.
  7. EQ-polijsting: shelf +0,5–1 dB bij 10–12 kHz indien nodig.
  8. Sends: mono slap 90–110 ms; 1/8 delay; korte plate met HPF/LPF op de return.

Derde partij smaak (voorbeeld):

  1. Auto-Tune / Melodyne: snel voor hooks, muzikaal voor coupletten; formanten aan.
  2. FabFilter Pro-Q 3: HPF 80 Hz; dynamische notch 250 Hz op luide frases.
  3. LA-2A / Opto: zachte vormgeving van het lichaam.
  4. Sooth-stijl resonantiecontrole: licht in 4–8 kHz alleen indien nodig.
  5. Analoge stijl saturatie: lage mix voor dichtheid.
  6. 1176-stijl comp: snel, 1–2 dB GR voor pieken.
  7. Air EQ (Maag-stijl): kleine +0,5–1 dB bij 10–12 kHz als de microfoon donker klinkt.
  8. FX: EchoBoy slap + dotted-eighth; Valhalla Plate korte decay; gefilterde returns.

IX. Probleemoplossing: snelle oplossingen die echt werken

  • Lucht is mooi maar S-klanken zijn scherp: verbreed de de-esser band, verlaag de air shelf met 0,5 dB, en low-pass de delay tot ~6–7 kHz.
  • Lead klinkt dun in hooks: versoepel de HPF een paar Hz, voeg +1 dB toe bij 160–220 Hz (breed), en meng 10–20% parallelle warmte.
  • Stapels vertroebelen het midden: op de BGV-bus, −1 tot −2 dB bij 250 Hz (breed), sterkere de-ess, donkerder plate.
  • Overgetunede artefacten: vertraag de retune iets en verhoog humanize/transition; zorg dat formanten behouden blijven.
  • Medeklinkers verdwijnen bij laag volume: een kleine +0,5 dB rond ~3 kHz op de lead, of verhoog sidechain ducking op de delay zodat herhalingen niet op lettergrepen liggen.

X. Export, loudness en volgende stappen

Tijdens het mixen: houd ruwe vocalen pieken rond −12 tot −8 dBFS. Laat na verwerking headroom over. Vermijd een harde limiter op je mixbus; deze stijl profiteert van ademruimte.

Definitieve bounce: exporteer stereo WAV, 24-bit op je sessie-samplefrequentie. Richt mixpieken op ongeveer −3 dBFS met een true peak ≤ −1.0 dBTP. Loudness hoort thuis in de mastering. Wanneer je klaar bent voor een platformveilige finish met uitgelijnde alternatieven (instrumentaal, a capella, clean/radio), boek online mastering. Als je een gezamenlijke push wilt om balansen en FX-rides te finaliseren, laat dan een ronde professionele songmixing doen zodat jij je kunt blijven richten op het schrijven terwijl de mix wordt verfijnd.

XI. Afsluiting

Een door Tate geïnspireerde vocal is dichtbij en zelfverzekerd in de coupletten, daarna luchtig en verheven in de hook. Houd de lage middentonen netjes, beheer de aanwezigheid met terughoudendheid en ontwerp kleine, muzikale ruimtes rond de tekst. Bewaar een template voor je LEAD/BGV/WHISPER/ADLIB-bussen en leer deze grondig kennen. Als je sneller wilt werken, begin dan met zorgvuldig samengestelde opnametemplates, en pas vervolgens drempels en sends aan om bij het nummer te passen. Met een schone export en doordachte mastering behoud je de zachtheid en glans die dit geluid laten werken—op elk apparaat.

Vorige post Volgende bericht

gerelateerde berichten

How to Use Vocal Presets in Studio One

How to Use Vocal Presets in Studio One

In Studio One, a “vocal preset” is a reusable channel chain—EQ, compression, de-essing, tone color, delay, and reverb—that you can load in one move. This guide shows how to choose and load presets (FX Chains and Track Presets), set healthy gain, adapt tone to your mic, route sends, automate scenes, and save role-based versions for lead, doubles, harmonies, and ad-libs. If you want a tuned springboard, browse purpose-built Studio One vocal presets and then fine-tune thresholds and sends for your voice and room. I. What a “vocal preset” is in Studio One Studio One gives you several preset containers that make vocal chains easy to load and reuse: FX Chain preset — a saved insert stack with Macro controls (one-click channel strip). Track Preset — recalls inserts, order, I/O, color, and sends for a track (Studio One 6+). Song Template — opens a whole session “studio-ready” (lanes + FX channels prewired). Device presets — per-plug-in settings (Pro EQ³/Pro EQ², Compressor, De-Esser, Analog Delay, Room Reverb/OpenAIR, etc.). Loading a preset is step one. Step two is adapting input level, de-ess amount, presence, air, and FX balance to your voice and the song. II. Pre-flight (so presets behave) Pre-flight checklist Audio device & buffer: smaller buffer (64–128) while tracking; raise later for mixing. Session rate: 44.1 kHz for music (48 kHz if delivering to video). Input target: sing at performance level; aim raw peaks around −12 to −8 dBFS before any inserts. Track layout: one audio track named Lead Vox and two FX channels (A = Slap, B = Plate). Pop filter & distance: 10–20 cm from mic; stay consistent to stabilize tone. III. Load a vocal preset (four reliable routes) 1) FX Chain preset (fastest, macro-ready) Open the Browser (F5) → Effects → FX Chains → drag your chain onto the Lead Vox channel. Click the Macro panel (wrench icon) to expose Trim, De-Ess, Body, Presence, Air, and FX controls. Save your working copy (right-click channel header → Store FX Chain) as Lead — Clean (YourName). 2) Track Preset (lane + sends in one move) Right-click a track header → Apply Track Preset… (or drag from Browser → Track Presets). Set input, arm, and monitor. Your inserts and sends load together. 3) Song Template (start ready) New Song → pick your “Vocal Starter” template with Lead/Doubles/Harmonies/Ad-libs and Slap/Plate FX channels. Set inputs and record; everything else is prewired. 4) Drag-drop device presets In the Browser, drag device presets (Pro EQ³, Compressor, De-Esser, etc.) into empty insert slots to build a chain, then Store FX Chain. IV. Gain staging: make or break Interface pre first: set the mic pre so unprocessed peaks land −12 to −8 dBFS. Clip Gain / Event Gain: nudge loud/soft phrases (±2–3 dB) before compression; add short fades at edit points. Comp A target: aim ~3–5 dB gain reduction on phrases (ratio 2:1–3:1; attack 10–30 ms; release 80–160 ms). Don’t slam 10–12 dB constantly. Post-chain peak: keep track peaks around −6 to −3 dBFS; leave loudness for mastering. Level-match A/B: keep a final Gain/Trim at chain end so comparing presets isn’t skewed by “louder wins.” V. Five controls you’ll touch on every song De-Ess (6–8 kHz): turn until earbuds stop complaining; stop before consonants blur. Body (120–200 Hz): add warmth if thin; if the booth is boxy, reduce 250–350 Hz instead. Presence (3–4 kHz): tiny, wide lift only if diction hides. If hats/claps are bright, carve the beat rather than boosting the voice. Air (10–12 kHz): micro shelf only after sibilance is calm. FX blend: slapback 90–120 ms + short plate 0.7–1.0 s (pre-delay 20–50 ms). Verses drier; hooks open. VI. Lead vs. stacks: build a “family,” not clones Lead: mono-true center; minimal wideners; ride volume to keep the story forward. Doubles L/R: higher HPF than Lead; a touch more de-ess; tuck −6 to −9 dB under; micro-pan L/R; avoid chorus wideners that collapse in mono. Harmonies: darker EQ; wider than doubles; optional +0.5–1 dB near 5 kHz for shimmer only if needed. Ad-libs: narrow bandwidth (HPF ~200 Hz, LPF ~8–10 kHz); side-panned; short throw echoes on transitions. Save one FX Chain or Track Preset per role—Lead — Clean, Double — Tight, Harmony — Wide, Ad-Lib — Phone—so recall is instant and consistent. VII. Time & space: FX channels do the heavy lifting Create two FX channels: A = Slap (Analog Delay or Beat Delay), B = Plate (Room Reverb/OpenAIR plate IR). Filter returns: insert Pro EQ³ on each FX channel; HPF ~150 Hz, LPF ~6–7 kHz so tails never hiss on earbuds. Ducking trick: insert Compressor on the Slap FX channel; sidechain from Lead; fast attack/release; ~1–2 dB GR so echoes bloom in the gaps. Send automation: +1–2 dB into hooks; lower in dense verses; keep tails filtered. VIII. Macro Controls (FX Chains = your channel strip) Open the FX Chain editor → Macro Controls. Create knobs: Trim, De-Ess, Body, Presence, Air, FX. Map each knob to the key parameter (e.g., De-Esser amount, Pro EQ shelves, Delay/Reverb sends). Set useful ranges so a quarter-turn does something musical, not extreme. Store the FX Chain so every session loads with your “channel strip” in one click. IX. Stock “safe chain” (rebuildable anywhere) Pro EQ³/Pro EQ² (first): HPF 80–100 Hz; wide −1 to −2 dB at 250–350 Hz if boxy; tight notch near 1 kHz if nasal. Compressor (Comp A, shape): ratio 2:1–3:1; attack 10–30 ms; release 80–160 ms; ~3–5 dB GR on phrases. De-Esser: center ~6–8 kHz; reduce until S/T/SH are comfortable on earbuds. Compressor (Comp B, catcher): faster, 1–2 dB GR to stabilize send levels and peaks. Color (optional): Softube-style Saturation Knob (if installed) or stock Saturation; very low mix; output matched. Pro EQ (polish): +0.5–1 dB broad at 3–4 kHz only if diction hides; tiny 10–12 kHz shelf last. Sends: Analog/Beat Delay for slap; Room Reverb/OpenAIR plate; filter returns. Wrap as an FX Chain; add Macro controls; save as Lead — Stock Clean (S1); branch lighter/heavier variants per song. X. Fast audition (without fooling your ears) Loop a 10–20 s phrase with quiet and loud words. Keep a final Gain at chain end to level-match; flip FX Chains or Track Presets from the Browser. Pick what translates on earbuds/phone, not just the brightest option. XI. Two-track beat survival (bright hats, heavy subs) When the instrumental is a stereo file, reduce collisions instead of “more bright” on the voice: Mid dip on the beat (dynamic): insert Pro EQ on the instrumental bus; create a gentle bell around 3 kHz; sidechain a Compressor to the vocal and link (or automate) the EQ band for −1–2 dB only while the voice speaks. Splash control: keep the Lead’s Air conservative; LPF returns ~6–7 kHz if hats are icy. Mono check: temporarily sum the monitor path; the story should still land on a phone speaker. XII. Tracking vs. mixing: what to print Record dry, hear wet: monitor through the preset on Lead but print a clean take. If a collaborator needs the “demo vibe,” bus Lead to a PRINT track and record a wet safety (Lead_Wet). Commit late: render/freeze heavy FX near the end; keep an _FXPRINT audio track for recall. XIII. Automation that sells the line (micro, not macro) Volume rides: +0.5–1 dB into downbeats; −0.5 dB on tongue-twisters. De-ess threshold: slightly tighter on bright syllables; looser on dark phrases. FX choreography: lift Slap/Plate into hooks; lower in verses; keep tails filtered. XIV. Organization & recall (minutes now, hours later) Names that sort: Lead — Clean, Lead — Air+, Rap — Punch, Harmony — Wide, Ad-Lib — Phone. One per role: separate FX Chains/Track Presets for Lead/Doubles/Harmonies prevent over-de-essing stacks or over-brightening the center. Template: keep a “Starter — Vocals (Studio One)” Song Template with lanes and FX channels; start every song from it. XV. Troubleshooting (problem → focused move) Harsh S’s after adding Air: raise De-Esser slightly; reduce Air ~0.5 dB; LPF returns to ~6–7 kHz. Vocal sinks under 808: keep verses drier; add a tiny Presence lift; apply a subtle 2–4 kHz dip on the beat during lines. Clicks or crackles: raise buffer while mixing; disable heavy oversampling until render; close background apps. Preset sounds different at export: verify quality/oversampling modes; avoid master clipping; render at session rate. Chain feels “dead” on your mic: ease de-ess; reduce low-mid cuts; a tiny 150–180 Hz lift can restore chest without mud. Levels jump in A/B tests: match outputs with a final Gain; louder wins the ear unfairly. XVI. Learn more (next best step) Hand-offs are smoother when stems are clean and consistent. This walkthrough on how to export stems from Studio One step by step shows naming, starts, and tails that open cleanly anywhere. XVII. Quick action plan (copyable) Load an FX Chain or Track Preset; set input so raw peaks land −12 to −8 dBFS; Comp A kisses 3–5 dB. De-ess to “soft-bright,” add tiny Presence only if diction hides; keep Air conservative. Route Slap/Plate on FX channels; filter returns; duck Slap from the Lead; automate sends into hooks. Save role-based versions (Lead, Doubles, Harmonies, Ad-libs); keep a Song Template. Render roughs with headroom; keep the master unclipped; leave loudness for mastering. Used well, vocal presets are reliable shortcuts—not crutches. Keep headroom healthy, make small moves, automate what matters, and your voice will sit forward without harshness—song after song. For a fast start tuned to this DAW, grab the curated Studio One vocal presets and lock in your own “best-fit” versions for consistent, repeatable results.

Kom meer te weten
Use Vocal Presets in Pro Tools: Full Guide

Use Vocal Presets in Pro Tools: Full Guide

In Pro Tools, a vocal preset is a ready-to-load signal path—EQ, compression, de-essing, color, delay, and reverb—saved as a Track Preset, plug-in preset, or full session template. This guide walks you through pulling those presets into a session, calibrating input, shaping tone with a few decisive moves, routing effects the modern way, and keeping separate recipes for lead, doubles, harmonies, and ad-libs. If you’d like a jump start designed for this DAW, try the curated Pro Tools vocal presets and then tailor thresholds and sends to your voice. I. Presets in Pro Tools: what you can actually save Pro Tools gives you a few building blocks that cover most workflows: Track Presets — store inserts, their order, I/O, sends, and even color. Recall from the track nameplate or when creating a new track. Plug-in presets — AAX device states (EQs, compressors, de-essers, delays, reverbs) that you can mix and match inside any chain. Session Templates — open directly into a vocal-ready environment (lanes + FX returns) with one click. Import Session Data — cherry-pick a tuned vocal track (and its buses) from another session and drop it into your current one. Loading is step one. Step two—often skipped—is adapting gain, sibilance control, presence, and ambience to the singer and the song. II. Set the stage (short checklist) Before you hit record Playback Engine: choose your interface; 64–128 samples while tracking, then raise for mixing. Sample rate: 44.1 kHz for most releases (use 48 kHz when the project is headed to video). Healthy input: sing at performance level and target −12 to −8 dBFS on the raw input meter. Starter layout: one audio track named Lead Vox plus two aux returns: A = Slap, B = Plate. Meters: if you want to see gain before automation or sends, switch the track meter to pre-fader. III. Bringing a preset into the session (four dependable paths) 1) Track Presets (speed option) From the New Track dialog, choose Track Preset and select your vocal chain; or Right-click the track nameplate → Recall Track Preset…; or Open Workspace (Option+I) and drag a Track Preset onto the Edit/Mix window. Immediately store your version (e.g., Lead — Clean • YourName) so later tweaks do not overwrite the original. 2) Import Session Data (pull a lane with its plumbing) File → Import → Session Data… and choose a donor session with a vocal you trust. Enable the tuned Lead and its FX returns; if replacing a temp track, use “Match Tracks by Name.” 3) Session Template (open ready-to-record) Create from Template → pick your “Vocal Starter” (Lead, Doubles L/R, Harmonies, Ad-libs, Slap/Plate). Set the Lead input, arm, and you’re rolling—the buses are already patched. 4) Plug-in presets (surgical swaps) On the vocal track, load stock AAX tools (EQ3 7-Band, Dyn3 Comp/Lim, Dyn3 De-Esser, Mod Delay III, D-Verb/Space) or your third-party favorites. Save device presets that work; later, bundle them into a Track Preset for one-click recall. IV. Calibrate the signal (why your preset suddenly works) Preamp, then inserts: set the interface so unprocessed peaks land between −12 and −8 dBFS. Clip Gain first aid: tame shouty words and lift whispers before compression (±2–3 dB usually does it). Add short fades so edits are invisible. Compressor A sweet-spot: aim for roughly 3–5 dB gain reduction on phrases (2:1–3:1, 10–30 ms attack, 80–160 ms release). Heavy constant squeeze makes de-essing harder. After the chain: keep post-FX peaks around −6 to −3 dBFS. Loudness is a mastering decision, not a tracking one. Fair comparisons: add a Trim/Gain at the end of the chain so A/B tests aren’t won by “louder.” V. Five moves that shape 90% of a vocal Sibilance: set the de-esser band near 6–8 kHz; dial just enough that earbuds relax but consonants still read. Low-mid weight: add a touch at 120–200 Hz if the singer feels thin; if booth bloom shows up, shave 250–350 Hz instead. Presence lane: a wide, tiny lift around 3–4 kHz only when words hide. If cymbals are already bright, carve the beat rather than forcing the vocal. Air: small shelf at 10–12 kHz after sibilance is under control. Space: slapback around 90–120 ms and a short plate (0.7–1.0 s, 20–50 ms pre-delay). Keep verses drier; let choruses bloom. VI. One singer, many lanes: keep each job on its own rails Lead: mono-solid and stable in the center; width lives elsewhere. Ride phrases so the story never dips. Doubles L/R: higher high-pass than the Lead, slightly stronger de-ess, tucked 6–9 dB under; micro-pan left/right; avoid chorus wideners that collapse in mono. Harmonies: darker than doubles and spread wider; if they disappear, a tiny 5 kHz polish is enough. Ad-libs: narrowed bandwidth (HPF ~200 Hz, LPF 8–10 kHz), panned off-center, with short throws on transitions. Save a Track Preset per role (Lead — Clean, Double — Tight, Harmony — Wide, Ad-Lib — Phone) so recall is instant and consistent. VII. Ambience the modern way: two auxes, lots of control Create Aux A = Slap (Mod Delay III) and Aux B = Plate (D-Verb or Space). Filter both returns with EQ: HPF ~150 Hz, LPF ~6–7 kHz so tails never hiss on small speakers. Add a compressor on the Slap aux keyed from the Lead (fast attack/release, about 1–2 dB gain reduction). Echo appears in the gaps instead of stacking on words. Write simple send rides: +1–2 dB in hooks, pull back in dense verses. VIII. Stock toolkit that travels anywhere EQ3 7-Band (first): high-pass 80–100 Hz; gentle, wide cut at 250–350 Hz if boxy; tiny notch near 1 kHz only if needed. Dyn3 Comp/Lim (Comp A): 2:1–3:1, 10–30 ms attack, 80–160 ms release; kiss 3–5 dB on phrases. Dyn3 or Avid De-Esser: focus around 6–8 kHz; use ears, not meters. Dyn3 Comp/Lim (Comp B): faster “catcher” for 1–2 dB on peaks; stabilizes send level. Color (taste): AIR Lo-Fi or Distortion at very low mix for density; match output so “louder” doesn’t trick you. EQ3 (polish): broad +0.5–1 dB near 3–4 kHz if diction still hides; small air shelf last. Wrap the above as a Track Preset labeled clearly—Lead — Stock Clean (PT)—and spin lighter/heavier variants for different songs. IX. Evaluate presets quickly without fooling yourself Loop a 10–20 s section with soft words and loud ones. Keep a Trim/Gain at the end for level-match; flip Track Presets or plug-in stacks. Pick what translates on earbuds and a phone, not just the brightest option in the control room. X. If the beat is a single stereo file (tight hats, big subs) Let the vocal borrow space: on the instrumental bus, tie a gentle 2–4 kHz dip to a sidechained compressor keyed by the vocal—only 1–2 dB while the singer speaks. Top-end comfort: keep the Lead’s air move modest; low-pass the effects returns if cymbals already sizzle. Mono sanity check: collapse monitors briefly; the lyric should remain intelligible on a phone speaker. XI. Edit first, mix less: comping & Clip Gain Playlists: build a clean composite that favors diction and emotion. Pre-shape dynamics: quick Clip Gain nudges (±1–2 dB) smooth the ride so compressors do less heavy lifting. Breaths: reduce obvious gasps; keep the natural ones—they mark phrasing. XII. What to print (and when) Record dry while monitoring wet. Capture the clean Lead; if someone needs the “demo vibe,” route the Lead to a PRINT track and record a wet safety as well (Lead_Wet). Freeze or Commit heavy effects close to the finish line, and keep an _FXPRINT track for recall. XIII. Small automation, big payoff Level rides: +0.5–1 dB into downbeats; tiny dips on tongue-twisters. De-esser threshold: slightly tighter for bright syllables, looser for dark phrases. FX choreography: push Slap/Plate in the chorus; pull back for dense verses; keep returns filtered. XIV. Keep your library tidy (future-you will thank you) Names that sort: Lead — Clean, Lead — Air+, Rap — Punch, Harmony — Wide, Ad-Lib — Phone. One preset per lane: Lead/Doubles/Harmonies each get a dedicated Track Preset so you don’t over-de-ess stacks or brighten the center by accident. Session Template: keep a “Vocal Starter (PT)” with lanes and Slap/Plate auxes; start every song from it. XV. Troubleshooting: targeted fixes Air adds harshness: back off the shelf ~0.5 dB, lift the de-esser slightly, and low-pass the returns around 6–7 kHz. Vocal buried by 808: dry the sends in verses, add a hair of presence, and automate a subtle mid dip on the beat during lines. Clicks/crackles: increase buffer for mixing; disable look-ahead/heavy analyzers until bounce; close background apps. Preset sounds different on bounce: check quality/oversampling toggles, avoid master clipping, and bounce at the session rate. Chain feels flat on your mic: reduce low-mid cuts, ease the de-ess, and try a tiny 150–180 Hz lift for chest without mud. A/B bias: use the final Trim/Gain so loudness doesn’t decide the winner. XVI. One-page game plan Recall a Track Preset and calibrate input so raw peaks sit at −12 to −8 dBFS; Comp A glides at ~3–5 dB GR. Shape sibilance → body → presence → air with small, wide moves; keep FX tasteful in verses. Send to Slap/Plate auxes, filter returns, and sidechain-duck the Slap from the Lead. Store role-specific Track Presets (Lead, Doubles, Harmonies, Ad-libs) and use a session template. Print clean, keep headroom, and leave loudness for mastering. Used with intention, presets are a laser-cut shortcut—not a crutch. Keep headroom generous, make restrained moves, automate the few moments that matter, and the vocal will sit forward without grit or glare. When you want chains built for this exact ecosystem, start with the Pro Tools templates and lock in your own best-fit versions for repeatable results.

Kom meer te weten
How to Use Vocal Presets in Mixcraft

How to Use Vocal Presets in Mixcraft

In Mixcraft, a “vocal preset” is a reusable effects chain—EQ, compression, de-essing, tone color, delay, and reverb—that you can load on a track in one move. This guide shows how to pick and load the right preset, set healthy gain, shape tone, route sends, automate scenes, and save role-based versions for lead, doubles, harmonies, and ad-libs. Want a quick head start?  I. What a “vocal preset” is in Mixcraft Mixcraft supports several preset containers that make vocal chains easy to load and reuse: Effects Chain preset — a saved insert stack (order + settings) you can apply to any audio track. Track Template — an audio track saved with its chain, routing, color, and sends (e.g., Slap/Plate). Great when you want a full lane in one click. Project Template — a starter session with lanes (Lead, Doubles, Harmonies, Ad-libs) and Send tracks already set up. Using a preset is more than loading it—you’ll adapt input level, de-ess, presence, air, and FX balance to your voice and song. II. Pre-flight (so presets behave) Pre-flight checklist Audio device & buffer: select your interface; 64–128 samples to track, raise later for mixing. Session rate: 44.1 kHz for music (48 kHz if delivering to video). Input target: sing at performance volume; aim raw peaks around −12 to −8 dBFS before any FX. Track layout: start with one audio track named Lead Vox plus two Send tracks (A = Slap, B = Plate). Pop filter & distance: 10–20 cm from mic; keep stance consistent to stabilize tone. III. Load a vocal preset (four reliable routes) 1) Effects Chain preset (fastest) Select your Lead Vox track → open the FX window. Load an Effects Chain from the preset menu (or drag it from the Browser onto the FX area). Confirm the order: EQ → Comp A → De-Ess → (Color/Sat) → Comp B (catcher) → Utility. Immediately save your working copy with a clear name (e.g., Lead — Clean (YourName)). 2) Track Template (lane + sends in one move) Right-click in the track list → Insert Track From Template → choose your vocal template. Set the track input to your mic channel; arm and monitor. 3) Project Template (start ready every time) File → New Project → pick your “Vocal Starter” template (Lead/Doubles/Harmonies/Ad-libs + Slap/Plate sends). Set inputs and record; everything else is pre-wired. 4) Drag-drop from Browser Keep a _Presets/Vocals folder in the Browser; drag a chain onto the track when needed. IV. Gain staging: make or break Mic pre first: set the interface so unprocessed peaks hit −12 to −8 dBFS. Trim into Comp A: use the chain’s input/trim to hit ~3–5 dB gain reduction on phrases (ratio 2:1–3:1; attack 10–30 ms; release 80–160 ms). Don’t slam 10–12 dB constantly. After the rack: keep track peaks around −6 to −3 dBFS; loudness happens later in mastering. Level-match A/B: add a final trim/utility so preset comparisons aren’t biased by “louder wins.” V. Five controls you’ll touch on every song De-Ess (6–8 kHz): turn until earbuds stop complaining; stop before consonants blur. Body (120–200 Hz): add warmth if thin; if the booth sounds “boxy,” reduce 250–350 Hz instead. Presence (3–4 kHz): tiny, wide lift only if diction hides. If hats/claps are bright, carve the beat rather than boosting the voice. Air (10–12 kHz): micro shelf only after sibilance is calm. FX balance: slapback 90–120 ms and short plate 0.7–1.0 s (20–50 ms pre-delay). Verses drier; hooks open. VI. Lead vs. stacks: build a “family,” not clones Lead: mono-true center; minimal widening; automate volume to keep the story forward. Doubles L/R: higher HPF than Lead; a touch more de-ess; tuck −6 to −9 dB under; micro-pan left/right; avoid chorus wideners that collapse in mono. Harmonies: darker EQ; wider than doubles; optional +0.5–1 dB near 5 kHz for shimmer only if needed. Ad-libs: narrow bandwidth (HPF ~200 Hz, LPF ~8–10 kHz), side-panned, short throws on transitions. Save one preset per role—Lead — Clean, Double — Tight, Harmony — Wide, Ad-Lib — Phone—so recall is instant and consistent. VII. Time & space: Send tracks do the heavy lifting Create two Send tracks: A = Slap and B = Plate. Color them for quick spotting. On track A, add a short delay (≈90–110 ms), filter 150 Hz–6 kHz, low feedback. On track B, add a bright plate (0.7–1.0 s) with 20–50 ms pre-delay; HPF/LPF the return. Duck the Slap: place a compressor on A, sidechain from the Lead; fast attack/release so echoes bloom in the gaps. Automate sends: +1–2 dB into hooks; lower in dense verses; keep returns filtered for phone translation. VIII. Stock “safe chain” (rebuildable anywhere) EQ (first): HPF 80–100 Hz; wide −1 to −2 dB at 250–350 Hz if boxy; tight notch near 1 kHz if nasal. Compressor A (shape): ratio 2:1–3:1; attack 10–30 ms; release 80–160 ms; ~3–5 dB GR on phrases. De-Esser: center ~6–8 kHz; reduce until S/T/SH are comfortable on earbuds. Compressor B (catcher): faster 1–2 dB GR to stabilize sends and peaks. Color (optional): light saturation/tape; output matched so “louder” doesn’t fool you. EQ (polish): +0.5–1 dB broad at 3–4 kHz only if diction hides; tiny air shelf last. Delay & Reverb (sends): slap on A; plate on B; filter returns. Wrap it as an Effects Chain; save as Lead — Stock Clean (MX) and branch lighter/heavier versions per song. IX. Fast audition (without fooling your ears) Loop a 10–20 s phrase that includes quiet and loud words. Keep a final trim at the end of the chain; level-match before judging. Toggle chain presets; choose what translates on earbuds/phone, not just the brightest option. X. Two-track beat survival (bright hats, heavy subs) Carve, don’t fight: if the instrumental is a stereo file, cut small overlaps instead of “more bright” on vocals. A gentle dip around 2–4 kHz on the beat during vocal lines (via automation) lets consonants pop. Splash control: keep the Lead’s Air conservative; LPF returns ~6–7 kHz if hats are icy. Mono check: temporary mono on the master; the story should still land on a phone speaker. XI. Tracking vs. mixing: what to print Record dry, hear wet: monitor through the preset on the track but print a clean take. If a collaborator needs “demo vibe,” route Lead to a PRINT track and record a wet safety (Lead_Wet). Commit late: Freeze or render heavy FX near the end; keep an _FXPRINT audio track for recall. XII. Automation that sells the line (micro, not macro) Volume rides: +0.5–1 dB into downbeats; −0.5 dB on tongue-twisters. De-ess threshold: slightly tighter on bright syllables; looser on dark phrases. FX choreography: lift Slap/Plate into hooks; lower in verses; keep tails filtered. XIII. Organization & recall (minutes now, hours later) Names that sort: Lead — Clean, Lead — Air+, Rap — Punch, Harmony — Wide, Ad-Lib — Phone. One per role: separate chains for Lead/Doubles/Harmonies prevent over-de-essing stacks or over-brightening the center. Template: keep a “Starter — Vocals (Mixcraft)” project with lanes and two Send tracks. Duplicate for each new song. XIV. Troubleshooting (problem → focused move) Harsh S’s after adding Air: raise de-ess slightly; reduce Air by ~0.5 dB; LPF returns to ~6–7 kHz. Vocal sinks under 808: keep verses drier; add a tiny Presence lift; reduce delay feedback; consider a small 2–4 kHz dip on the beat during lines. Preset sounds different at export: check plug-in quality/latency modes; avoid master clipping; render at session rate. Clicks or crackles: raise buffer for mixing; disable heavy oversampling until render; close background apps. Chain feels “dead” on your mic: ease de-ess; reduce low-mid cuts; a tiny 150–180 Hz lift can restore chest without mud. Levels jump in A/B tests: match outputs with a final trim; louder wins the ear unfairly. XV. Quick action plan (copyable) Load an Effects Chain or Track Template; set input so raw peaks land −12 to −8 dBFS; Comp A kisses 3–5 dB. De-Ess to “soft-bright,” add tiny Presence only if diction hides; keep Air conservative. Route Slap/Plate on Send tracks; filter returns; duck Slap from the Lead; automate sends into hooks. Save role-based versions (Lead, Doubles, Harmonies, Ad-libs); keep a project template. Render roughs with headroom; keep the master unclipped; leave loudness for mastering. Used well, vocal presets are reliable shortcuts—not crutches. Keep headroom healthy, make small moves, automate what matters, and your voice will sit forward without harshness—song after song. When you want to start from chains already tuned for modern pop, rap, and R&B , explore vocal presets and lock in your own “best-fit” versions for fast, consistent sessions.

Kom meer te weten

Mixdiensten

Voel je vrij om onze mix- en masteringdiensten te bekijken als je je nummer professioneel gemixt en gemasterd wilt hebben.

Ontdek nu

Vocale Voorinstellingen

Verhoog moeiteloos je vocale tracks met Vocal Presets. Geoptimaliseerd voor uitzonderlijke prestaties, bieden deze presets een complete oplossing voor het bereiken van uitstekende vocale kwaliteit in verschillende muziekgenres. Met slechts een paar eenvoudige aanpassingen zullen je vocalen opvallen met helderheid en moderne elegantie, waardoor Vocal Presets een essentieel hulpmiddel worden voor elke opnameartiest, muziekproducent of audio-engineer.

Ontdek nu

BCHILL MUSIC

Hey! Mijn naam is Byron en ik ben een professionele muziekproducent & mixengineer met meer dan 10 jaar ervaring. Neem vandaag nog contact met mij op voor jouw mix- en masteringdiensten.

DIENSTEN

Wij bieden premium diensten aan onze klanten, waaronder industriestandaard mixdiensten, masteringdiensten, muziekproductiediensten evenals professionele opname- en mixtemplates.

Mengdiensten

Ontdek nu

Meesterschap in diensten

Meesterschap in diensten

Vocale Voorinstellingen

Ontdek nu
Adoric Bundles Embed