Vocal Presets & Templates
Select your DAW below to browse Vocal Presets tailored for your setup.
Type: Recording Template
Logic Pro X R&B Recording Template – Vocal Preset
Type: Vocal Preset
NBA YoungBoy Vocal Preset BandLab
Type: Vocal Preset
R&B Vocal Preset BandLab
Type: Vocal Preset
Clear Vocals Preset BandLab
Type: Vocal Preset
NBA YoungBoy Vocal Preset FL Studio
Type: Vocal Preset
Clear Vocals Preset Studio One (Stock Plugins)
Type: Vocal Preset
R&B Vocal Preset FL Studio (Stock Plugins)
Type: Vocal Preset
Rap Vocal Preset for Cubase (Stock Plugins)
Type: Vocal Preset
The Kid Laroi Vocal Preset BandLab
Type: Vocal Preset
Juice Wrld BandLab Vocal Preset
Type: Recording Template
Logic Pro X Rap Recording Template - Vocal Preset
Type: Mixing Template
Instrumental Beat Mixing Template – Pro Tools Template for Hip Hop, R&B & Trap
Type: Recording Template
Cubase Recording Template (Stock Plugins)
Transform Your Session In Seconds
Instant Session Setup With Our Ready-to-Use Recording Templates & Vocal Presets.
Industry Credits
Westside Boogie
Shontelle
Jarren Benton
DJ Tunez
Vory
Caskey
Rittz
Nia Riley
Eugy
Q Parker
About The Engineer
About The Engineer
Hey! I’m Byron Hill, a professional music producer and mixing engineer with over 15 years of experience, based in Atlanta, GA. I’ve worked with thousands of clients worldwide across a wide range of genres — from independent artists to major label talent. My credits include work with Westside Boogie, Vory, Shontelle, DJ Tunez, Jarren Benton, and Ritz, as well as creators and brands like Daryl Mayes, SeanDoesMagic, and Chubbies Clothing.
Over the years, I’ve developed a trained ear for crafting vocal chains that deliver a clean, balanced, and professional sound — no matter the genre or DAW. Each preset in this collection is built with the same goal: to help you move faster, sound better, and bring your voice to life with clarity, confidence, and intention.
Listen to our Work
R&B
Before
After
Rap
Before
After
Pop
Before
After
Soul
Before
After
Rock
Before
After
Latin
Before
After
FAQ'S
Are these presets beginner-friendly?
Are these presets beginner-friendly?
Yes — every preset is optimized to work instantly. Just drag, drop, and start recording. Whether you’re just starting out or already recording regularly, these presets help you sound mix-ready right away.
Do I need any third-party plugins to use these presets?
Do I need any third-party plugins to use these presets?
We offer both stock plugin versions (no extra plugins required) and premium versions (that use industry-standard third-party tools). The product description clearly lists any required plugins.
Will this work with my DAW (FL Studio, Ableton, etc.)?
Will this work with my DAW (FL Studio, Ableton, etc.)?
Yes — each preset is built specifically for your DAW.Just select your software from the preset menu before checkout. We support all major DAWs including FL Studio, Logic Pro, Pro Tools, Ableton, Studio One, and more.
Can I use these for singing, rapping, or both?
Can I use these for singing, rapping, or both?
Absolutely — presets are built for modern vocal styles and include EQ, compression, reverb, and delay settings tailored for both singing and rapping. The chain is flexible enough to work across genres.
How fast do I get my files after purchase?
How fast do I get my files after purchase?
Instantly. As soon as you complete your order, you’ll receive a download link along with a step-by-step install guide tailored to your DAW. You can be recording with your new vocal chain in minutes.
Our Blogs
How to Mix Vocals Like Tate McRae (Modern Pop-Dance Guide)
Tate McRae’s vocal sound is intimate in the verses and glossy in the choruses—breathy but clear, bright without harshness, and always steady in level. This guide walks you through capture, routing, chain order, FX design, stacks, and export targets so your mix survives phones, earbuds, and big rooms. If you prefer a head start, drop in pop vocal presets as a base map and customize thresholds and sends to your voice. I. What listeners expect from this aesthetic Modern pop-dance vocals feel close and emotional. You hear soft consonants and breath texture in the verse, then a lifted, airy hook that floats above synths and drums. The top end is pretty rather than piercing, the low-mids stay lean, and the dynamics are steady through serial compression—not a slammed limiter. Presence: readable 2–4 kHz without harsh spikes. Air: gentle sheen at 10–12 kHz; de-ess before you add shine. Depth: short plate/room plus tempo delays that move with the groove. Lift: doubles, whispers, and tight harmonies that rise in the chorus. II. Capture choices that pay off later Record 15–20 cm from a pop filter. Aim raw peaks around −12 to −8 dBFS. Keep the booth quiet; avoid heavy EQ or compression on the way in. If you need a small HPF for rumble, set it conservatively. Comp clean takes. Preserve natural breaths—this style relies on air texture. If you need help building a reliable recording space, this home vocal studio guide covers room basics, gain staging, and workflow so takes arrive mix-ready. III. Routing that keeps you fast and organized Create four lanes: LEAD – main vocal lines. BGV – harmonies and pad-like stacks. WHISPER – breathy doubles used sparingly for gloss. ADLIB – character moments and transitions. All feed a Vocal Master bus where you monitor through a gentle chain. Sends: mono slap, tempo delay, short plate or tight room, and a “throws” bus for moment effects. IV. The baseline chain (numbers you can trust) Keep moves small. The sound is refined, not hyped. Pitch correction: set key/scale. Hooks can take a faster retune; verses usually prefer moderate speed. Use “humanize/transition” so long vowels stay natural. Enable formants when available. Subtractive EQ: HPF 70–90 Hz (voice-dependent). If boxy, dip 200–350 Hz gently (wide Q). If nasal, try a soft notch around 1 kHz. Compressor 1 (shape): 2:1–3:1, attack 10–30 ms, release 80–200 ms or auto, 3–5 dB GR on phrases. Let consonants breathe. De-esser 1: wide band at 6–8 kHz; reduce only what you hear on earbuds. Harmonic color: warm/tape/triode at 5–10% mix. Match output so “louder” doesn’t fool you. Compressor 2 (safety): faster, 1–2 dB GR on peaks to keep level steady in choruses. Polish EQ: if the mic is soft, +0.5–1 dB at 3–4 kHz for presence and +0.5–1 dB shelf at 10–12 kHz for air. If sibilance rises, return to de-essing instead of boosting more. Sends: mono slap 80–120 ms or a synced 1/8; small plate/room (0.7–1.2 s) with 20–60 ms pre-delay; dedicated “throws” for key words. V. Time & space design for modern hooks Slap delay: mono, 80–120 ms, low feedback, filtered to ~150 Hz–6 kHz. Adds motion without haze. Tempo delay: 1/8 or dotted-eighth, low feedback. Duck it with sidechain so repeats breathe between syllables. Plate vs. room: short bright plate (0.7–1.0 s) for lift or a tight studio room for intimacy. Always high-pass and low-pass the return. Throws: automate a wider delay only on transitions; shape with filters so the lyric remains the focus. Re-check at quiet volume. If diction blurs, shorten pre-delay, reduce HF in the returns, or ride FX down during fast phrases. VI. Chorus architecture: doubles, whispers, harmonies Doubles: record two tight doubles for the hook. High-pass slightly higher than the lead, apply more de-ess, and tuck each 6–9 dB below. Keep center for thickness or pan lightly L/R for width without chorus swirl. Whisper layer: a gentle breathy take can add pop shimmer. Filter lows, de-ess firmly, and compress lightly; it should be felt, not obvious. Harmonies: keep them as a clean bed. Less saturation, darker reverb. If the stack clouds, dip 250 Hz by 1–2 dB on the BGV bus. Automate entrances so the hook opens up rather than jumps in volume. Gain choreography: ride the lead ±1 dB into downbeats. Lift the doubles slightly on the last bar before the chorus to create momentum. VII. Seat the vocal inside the production Whether you mix over a stereo instrumental or grouped stems, focus on overlap management rather than boosting brightness. Dynamic EQ on the music bus: sidechain a small 2–4 kHz dip from the lead; consonants pop without harshness. Low-end coexistence: if kick or bass masks syllables, try a dynamic shelf around 120–180 Hz keyed from the lead on the music bus. Phone & small-speaker proof: bounce a quick rough and listen on a phone speaker. If hats sting, reduce the lead air shelf 0.5 dB and low-pass the delay return. VIII. Two complete chains (stock-only and third-party) Stock-only chain (any major DAW): Pitch Correction: fast for hook lifts, moderate for verses; humanize/transition engaged; formants preserved. EQ: HPF 80 Hz; wide −2 dB at 250 Hz if muddy; tiny +0.5 dB at 3.5 kHz if dull. Compressor 1: 2:1; attack 20 ms; release 120 ms; 3–5 dB GR. De-esser: 6–8 kHz, broad; reduce 2–4 dB on S’s. Saturation: warm/tape, 5–10% mix. Compressor 2: faster; 1–2 dB GR on peaks. EQ polish: shelf +0.5–1 dB at 10–12 kHz if needed. Sends: mono slap 90–110 ms; 1/8 delay; short plate with HPF/LPF on the return. Third-party flavor (example): Auto-Tune / Melodyne: quick for hooks, musical for verses; formants on. FabFilter Pro-Q 3: HPF 80 Hz; dynamic notch 250 Hz on loud phrases. LA-2A / Opto: gentle body shaping. Sooth-style resonance control: light in 4–8 kHz only as needed. Analog-style saturation: low mix for density. 1176-style comp: fast, 1–2 dB GR for peaks. Air EQ (Maag-style): tiny +0.5–1 dB at 10–12 kHz if the mic is dark. FX: EchoBoy slap + dotted-eighth; Valhalla Plate short decay; filtered returns. IX. Troubleshooting: quick cures that actually work Air is pretty but S’s are sharp: broaden the de-esser band, reduce the air shelf by 0.5 dB, and low-pass the delay to ~6–7 kHz. Lead sounds thin in hooks: ease the HPF a few Hz, add +1 dB at 160–220 Hz (wide), and blend 10–20% parallel warmth. Stacks cloud the center: on BGV bus, −1 to −2 dB at 250 Hz (wide), stronger de-ess, darker plate. Over-tuned artifacts: slow retune slightly and raise humanize/transition; ensure formants are preserved. Consonants vanish at low volume: tiny +0.5 dB at ~3 kHz on the lead, or increase sidechain ducking on the delay so repeats don’t sit on syllables. X. Export, loudness, and next steps During mixing: keep raw vocal peaks around −12 to −8 dBFS. After processing, leave headroom. Avoid a hard limiter on your mix bus; this style benefits from breathing room. Final bounce: export stereo WAV, 24-bit at your session sample rate. Target mix peaks near −3 dBFS with true peak ≤ −1.0 dBTP. Loudness belongs in mastering. When you’re ready for a platform-safe finish with aligned alternates (instrumental, a cappella, clean/radio), book online mastering. If you want a collaborative push to finalize balances and FX rides, a pass of professional song mixing lets you stay focused on writing while the mix is refined. XI. Wrap-up A Tate-inspired vocal is close and confident in the verses, then airy and lifted in the hook. Keep low-mids tidy, manage presence with restraint, and design small, musical spaces around the lyric. Save a template for your LEAD/BGV/WHISPER/ADLIB buses and learn it deeply. If you want to move faster, start from curated recording templates, then nudge thresholds and sends to fit the song. With a clean export and thoughtful mastering, you’ll keep the softness and shine that make this sound work—on every device.
Learn more
How to Mix Vocals Like Sabrina Carpenter (Glossy Pop Guide)
Sabrina Carpenter’s pop vocals feel close, silky, and confident—airy on top, steady in the middle, and never harsh. This guide shows the capture plan, chain order, layer strategy, delays/reverbs, and print settings to get that vibe in any DAW. For a fast head start, audition curated vocal presets and tailor the last 10% to your voice and mic. I. The pop aesthetic: airy, intimate, polished Three pillars define this sound: clarity, gentleness, and lift. The voice sits forward without spiky sibilance. Air lives above 10 kHz, but the top never turns brittle. Hooks rise with organized layers—tight doubles and clean harmonies—while verses stay intimate and dry-ish with small, tempo-aware ambience. Tone: clean low-mids, articulate 2–4 kHz, soft air 10–12 kHz. Dynamics: steady level from subtle serial compression (not brickwalling). Space: short slap or 1/8 note delay for motion; compact plate or room for depth. Quick terms: dBFS = digital level (0 clips). LUFS = perceived loudness. True peak (dBTP) anticipates inter-sample spikes—protect headroom now for cleaner mastering later. II. Capture & routing: a session map that saves time Track 15–20 cm from a pop filter. Aim raw peaks around −12 to −8 dBFS. Keep the room quiet and consistent. Print light HPF on the way in only if your booth rumbles; otherwise leave capture flat. Route leads to a LEAD bus, stacks to a BGV bus, ad-libs to an ADLIB bus. All feed a Vocal Master where you monitor into a gentle chain. This keeps processing focused and decisions repeatable. III. The sweet-spot chain (numbers you can trust) This is a starting map. Keep moves small; the style rewards subtlety. Pitch correction: Key/scale set; fast retune for hook lifts, moderate for verses. Use humanize/transition to preserve long vowels. Keep formants on so color stays natural. Subtractive EQ: HPF 70–90 Hz (voice-dependent). If boxy, dip 200–350 Hz gently. If nasal, try a small notch near 1 kHz. Keep cuts wider than boosts. Compressor 1 (shape): 2:1–3:1, attack 10–30 ms, release 80–200 ms or auto; 3–5 dB GR on phrases. Consonants should still pop. De-esser 1: Broad band centered 6–8 kHz; reduce only what you hear. Check on earbuds. Color/saturation: Warm/tape/triode at low mix (5–10%). You want density, not fuzz. Match output to avoid “louder sounds better.” Compressor 2 (safety): Faster; 1–2 dB GR to catch peaks. Think pocketing, not flattening. Polish EQ: If the mic is soft, +0.5–1 dB at 3–4 kHz for presence, and +0.5–1 dB shelf at 10–12 kHz for air. If sibilance flares, step back and de-ess instead. Sends: mono slap 80–120 ms or 1/8 note delay; small plate or tight room; tasteful throws for transitions. IV. Layers that lift the chorus Doubles (tight thickness). Record two doubles for hooks. High-pass slightly higher than the lead. More de-ess than the lead. Tuck each 6–9 dB below. Either keep centered for fullness or pan lightly L/R for width without chorus swirl. Harmonies (clean bed). Balance like a pad. Less saturation, stronger de-ess, and a darker reverb. If the stack clouds, dip 250 Hz by 1–2 dB on the BGV bus. Blend until the lead floats on top without strain. Ad-libs (character and lift). Keep a separate ADLIB chain: lighter compression, small band-pass “phone” moments for edges, or a soft micro-pitch for spread. Pan off-center to avoid fighting the hook center image. Gain choreography. Automate the lead ±1 dB into downbeats. Raise doubles a touch at hook entries. Pull FX down during fast consonants so words stay readable. V. Time & space design: depth without haze Slap (attitude): 80–120 ms mono, low feedback, filtered to ~150 Hz–6 kHz. It adds motion without washing detail. Tempo delay (movement): 1/8 or dotted-8th, low feedback. Duck the delay with sidechain so repeats bloom between syllables. Plate vs. room (dimension): short plate 0.7–1.2 s, pre-delay 20–60 ms; or a small studio room with tight decay. Always high-pass and low-pass the return. Throws (moments): last word into a chorus, or a breath before a beat drop. Keep them shaped—automation beats huge FX levels. At low monitoring volume, re-check: if diction blurs, shorten pre-delay, lower HF in the returns, or ride FX a dB. VI. Seat the vocal inside the instrumental Many pop productions use a stereo instrumental or a bussable “music” stem group. Keep the lead in focus by managing overlap instead of cranking brightness. Dynamic EQ on the beat: key a small dip at 2–4 kHz from the vocal so consonants read without harshness. Low-end coexistence: if kicks or bass smear phrases, try a dynamic shelf at 120–180 Hz on the music bus keyed to the lead. Small-speaker proof: bounce a rough and test on a phone. If hats sting, nudge the vocal air down 0.5 dB and low-pass delay returns. Working over a premade track? This walkthrough on mix vocals over a 2-track beat shows fast ways to place the voice cleanly without fighting the stereo file. VII. Print & translate: levels that survive platforms During mixing: keep raw vocal peaks around −12 to −8 dBFS. After the chain, leave headroom. Skip hard limiting on your mix bus; this style needs breathing room. Export for mastering: stereo WAV, 24-bit at the session sample rate. Final mix peaks near −3 dBFS with true peak ≤ −1.0 dBTP. Loudness comes later. For a cohesive, platform-safe finish with labeled alternates (instrumental, a cappella, clean/radio), lean on mastering services. If you want help finishing the mix: a collaborative pass of professional mixing services can dial balances, FX rides, and stem organization while you focus on tracking and writing. VIII. Quick cures (fast problems, small fixes) Air is pretty but S’s are sharp: reduce the air shelf 0.5 dB, broaden the de-esser band, and low-pass delay returns to ~6–7 kHz. Lead sounds thin in the hook: ease the HPF a few Hz, add +1 dB at 160–220 Hz (wide), and blend 10–20% parallel warmth. Stacks cloud the center: on BGV bus, −1 to −2 dB at 250 Hz (wide), more de-ess, darker plate. Over-tuned artifacts: slow retune slightly and raise humanize/transition; ensure formants are preserved. Consonants vanish at low volume: tiny +0.5 dB at ~3 kHz on the lead, or increase sidechain ducking on the delay so repeats don’t cover syllables. IX. Wrap-up Sabrina-style pop vocals balance intimacy with polish. Keep the low-mids tidy, manage presence with care, and design small, musical spaces around the lyric. Save a base template, learn it deeply, and use references at one monitor level so choices stay consistent.
Learn more
How to Mix Vocals Like Bad Bunny (Reggaetón & Latin Trap Guide)
Modern reggaetón vocals are confident, bright, and rhythm-first. This guide shows you a Bad Bunny–style vocal approach: chain blueprint, Spanish-friendly tuning, dembow FX, doubles/coros, and export targets that translate to phones and clubs. For a fast starting point, try curated vocal presets and customize the last 10% to your voice. I. Signature palette: what listeners expect Latin trap and reggaetón vocals carry groove and attitude. The voice rides the dembow or 808 pattern, with clear consonants and a polished top. Hooks lift through coros (layers) and harmonies; verses stay dry and close, with short slap/tempo delays for movement. Ad-libs add character and space between phrases. Clarity: articulate 2–4 kHz, no woolly low-mids. Shine: controlled air at 10–12 kHz, never sharp. Groove: delays lock to tempo; reverb is tight and filtered. Control: level is steady via serial compression, not brickwalled. Quick terms: dBFS is digital level; 0 clips. LUFS is perceived loudness. True peak (dBTP) catches inter-sample spikes—protect headroom for mastering later. II. Chain blueprint (from capture to polish) Route all leads to a LEAD bus, stacks to a COROS bus, and ad-libs to an ADLIB bus. These feed a Vocal Master. Mix into a gentle chain so decisions stick. Pitch correction: fast retune for rap-sung lines; humanize to avoid warble; preserve formants. Subtractive EQ: HPF 70–90 Hz; dip boxiness 200–350 Hz as needed. Compressor 1: slow/medium attack for punch, 3–6 dB GR on peaks. De-esser: broad band 5–8 kHz; reduce only what you hear. Saturation (low mix): density, not distortion; match output level. Compressor 2 (safety): faster, 1–2 dB GR to catch spikes. Polish EQ: tiny presence/air shelf if the mic is dull. Send FX: mono slap, tempo delay, compact plate/hall, plus creative throws for ad-libs. III. Spanish delivery: tuning, timing, and diction Tuning for Spanish vowels. Spanish vowel sustains are pure; fast retune can sound robotic if pushed. Use a quick retune for hooks, moderate for verses; add “humanize/transition” so long vowels do not wobble. Keep formant correction on to preserve color during pitch moves. Diction and sibilants. “S,” “ch,” and bright fricatives can poke on earbuds. Set the de-esser gently first; if needed, add a second, lighter de-ess later in the chain. Avoid narrow boosts above 8 kHz—prefer a broad, small shelf. Timing the groove. The dembow swing sits between straight and triplet. Align doubles within ±10 ms; anything wider turns into chorus. Use clip gain to even loud syllables before compression. IV. Practical settings (step-by-step) Gain stage. Track raw peaks around −12 to −8 dBFS. Trim regions so the chain sees steady input. Pitch correction. Set key/scale. Retune fast for hook phrases; moderate for verses. Humanize 20–40%. Formants preserved. Subtractive EQ. HPF 70–90 Hz; remove mud 200–350 Hz (wide dip). If honk lives near 1 kHz, dip gently. Keep cuts small. Compressor 1 (shape). 2:1–3:1; attack 10–30 ms; release 80–200 ms or auto; 3–6 dB GR on loud lines. The consonants should still snap. De-esser. Start 5–8 kHz; wide band; reduce 2–4 dB on S’s. Check on earbuds. Saturation. Tape/triode or clean transformer. Mix 5–10%. Match output so you’re not fooled by loudness. Compressor 2 (safety). Faster, 1–2 dB GR to catch peaks when coros stack up. Presence polish. If needed: +0.5 dB at 3–4 kHz (wide bell). Air shelf +0.5–1 dB at 10–12 kHz for shine, not hiss. Space. Mono slap 80–120 ms; LPF the return ~6–8 kHz. Tempo delay 1/8 or 1/4 with low feedback; sidechain-duck the delay from the lead so repeats breathe between words. Automation. Lift the lead +0.5–1 dB into downbeats; dip FX during dense consonants so words stay readable. V. Coros, dobles y ad-libs (the stack game) Doubles (dobles). Two tight doubles on hooks thicken the center. High-pass slightly higher than the lead, more de-ess, and keep each double 6–9 dB below the lead. Pan subtly L/R if you want width, or stack center for thickness. Coros (harmonies). Treat as a soft bed. Less saturation, more de-ess. If the stack clouds, dip 200–300 Hz a dB or two on the COROS bus. Add a darker plate/hall reverb with 20–60 ms pre-delay so the lead stays upfront. Ad-libs (ad-libs en español o Spanglish). Personality lives here. Try band-pass “phone” effect (300 Hz–3 kHz), micro-pitch for spread, or a triplet echo on transitions. Pan off-center to leave the hook focal point in the middle. Routing recap. Lead → LEAD bus; doubles/harmonies → COROS; ad-libs → ADLIB; all into Vocal Master. This speeds mixing and keeps decisions organized. VI. Beat relationship: dembow & 808 without clashes Over a 2-track beat. Treat the beat as a MUSIC bus. Carve space at 2–4 kHz using a dynamic dip keyed to the lead. If the kick or 808 masks syllables, a narrow dynamic cut around 120–180 Hz (keyed to the vocal) cleans collisions. For clean deliverables later, learn how to export stems from Logic Pro so versions line up. With stems. Group DRUMS, 808/BASS, MUSIC. Adjust 808 envelope so tails don’t smear words. Use sidechain only as flavor; too much pumping distracts from the lyric. Delays that groove. Many Latin trap hooks love a short stereo 1/8 with very low feedback, or a mono slap that clicks with the dembow. Filter the return; let the words lead, not the echoes. VII. Two chain examples (stock-only and third-party) Stock-only chain (any major DAW): Pitch Correction: key/scale set; fast for hooks, moderate for verses; humanize 20–40%. EQ: HPF 80 Hz; wide −2 dB at 250 Hz if muddy; tiny +0.5 dB at 3.5 kHz if dull. Compressor 1: 2:1; attack 20 ms; release 120 ms; 3–5 dB GR. De-esser: 6–8 kHz, broad; reduce 2–4 dB on S’s. Saturation: warm/tape, 5–10% mix. Compressor 2: faster, 1–2 dB GR. EQ polish: shelf +0.5–1 dB at 10–12 kHz if the mic is dark. Sends: mono slap 90–110 ms; 1/8 tempo delay; short plate (0.7–1.2 s) with HPF/LPF on the return. Third-party flavor (example): Auto-Tune / Melodyne: quick for hooks, musical for verses; preserve formants. FabFilter Pro-Q 3: HPF 80 Hz; dynamic notch 250 Hz on loud phrases. LA-2A / Opto: gentle, musical body. Sooth-style resonance control: light in 4–8 kHz. Analog-style saturation (low mix). 1176-style comp: fast, 1–2 dB GR on peaks. Air EQ (Maag-style): +0.5–1 dB at 10–12 kHz if needed. FX: EchoBoy slap + 1/8 note; Valhalla Plate short decay, filtered returns. VIII. Loudness, headroom, and delivery During mixing. Keep raw vocal peaks at −12 to −8 dBFS. After your chain, leave headroom. Do not slam a hard limiter on the mix bus. Your final mix should peak around −3 dBFS with true peak ≤ −1.0 dBTP. Loudness belongs in mastering, not in vocal mixing. Final bounce. Export 24-bit WAV at the session sample rate. Provide a clean premaster for mastering. If you want cohesive, platform-ready loudness and a labeled set of alternates (instrumental, a cappella, clean/radio), book notes-driven mastering services. Need help finishing the mix or balancing the beat and stacks? Collaborative professional mixing services can take it across the line while you focus on writing. IX. Fast fixes (common problems, quick cures) Harsh top on phones: widen de-ess band; reduce 8–10 kHz by 0.5 dB on the lead; low-pass delay returns to ~6 kHz. Vocal too thin in hooks: back off HPF a few Hz; add +1 dB at 160–220 Hz (wide); blend 10–20% parallel saturation. Words lost under 808: dynamic notch on 808 around 120–180 Hz keyed from the lead; small 2–4 kHz dip on MUSIC bus when the vocal speaks. Robotic tuning: slow retune slightly; raise humanize/transition; make sure formants are preserved. Stack cloudiness: on COROS bus, −1 to −2 dB at 250 Hz (wide), more de-ess, darker reverb. X. Workflow that finishes songs Save a vocal template with LEAD, COROS, and ADLIB buses plus slap, tempo delay, plate, and “FX” sends. Build a small reference playlist from Latin trap/reggaetón records you trust. Work at a steady monitor level. Make small moves. Let arrangement and stacks create lift between sections.
Learn more